Your current location : Home >> News >> company news

ContactContact Us

Dashiqiao jinrui refractory co. LTD

Address: Daling Village, Guantun Town, Dashiqiao City, Liaoning Province

Phone: +86 139-4176-5699

Phone: +86 188-4171-2888

Fax: +86 0417-5365657

Website: www.dsqjrnh.com

Website: en.dsqjrnh.com

Light burned magnesium powder is an important refractory material

2020-01-02 14:05:40
a

Lightly burned magnesium powder is an important refractory material Lightly burned magnesium oxide powder is a raw material with medium alkalinity chemical activity. It is used in other industrial fields in addition to being a refractory gelling material. In addition, the development of converter slag splashing furnace protection technology, light burned magnesium powder, further expanded the scope of use of light burned magnesium oxide powder. At present, the slag splashing furnace protection technology mostly uses lightly burned magnesium oxide powder into balls, including lightly burned magnesium oxide powder balls, carbon-containing lightly burned magnesium oxide sub-balls carbon-containing calcium-containing lightly burned magnesium oxide powder balls. Lightly burned magnesium oxide powder, referred to as lightly burned magnesium powder, is an active magnesium oxide obtained by calcining magnesium hydroxide extracted magnesite, brucite seawater brine at about 800 ~ 1000 ℃. The light burnt magnesium powder is light yellow light brown powder, the particle size is mostly below 100 mesh, the perovskite crystal is very small. The density of light burnt magnesium balls is prepared by adding 80% light burnt magnesium powder to 2O water mixing The grinder performs rolling, mixing, mixing for 15 to 20 minutes to form a mixture, which is sent to the ball press machine through a belt conveyor to prepare the product, then stacked. After the finished lightly burned magnesium ball is dried for 48 hours constitutes strength, it is ready for sale.


1585559469160912.png


Improvement of the production process of lightly burned magnesium balls

1 Necessity of improving the production process of lightly burned magnesium balls

1) The sphere is loose. Low density, low strength easy to break. Especially when loading, unloading, transporting, squeezing falling, the sphere is easy to break.

2) Low ball formation rate. After the raw materials are processed by the ball press machine, half are products half are powder particles. The powder particles need to be manually returned to the ball press machine to continue processing.

3) The user is satisfied. The products sold contain mixtures of 2O% -35% small pieces powders, which have been repeatedly disputed by users.

4) The shape of the sphere is incomplete. Some are half a ball, some are a third, some have missing corners, different shapes, dull appearance, poor appearance

The content of the article comes the Internet, please contact us if you have any questions!


Tag

Pre:None
Next:None

Recent browse:

Related products

Related news

1.png

1585532195188835.png

Contact

Daling Village, Guantun Town, Dashiqiao City, Liaoning Province

tel:+86 139-4176-5699

tel:+86 188-4171-2888

Fax:+86 0417-5365657

Pay attention

scan it

Learn more +